欢迎来到上海郜盟检测技术有限公司官网! 中文版|English加入收藏|设为首页
专业认证,用心服务信誉第一、服务领先!
服务热线:021-34122669

联系我们

  • 联系人:陈经理
  • 电话:021-34122669
  • 手机:18018853504
  • QQ:1312447001
  • 地址:上海市闵行区华中路6号A座
  • 技术交流位置:首页 > 技术交流
    儿童自行车CE认证- EN ISO 8098:2014详解-GPSD
    发表时间:2022-06-30     阅读次数:     字体:【大 中 小】

    儿童自行车是指适合于4-8岁儿童骑行,最大鞍座高度为435mm~635mm,凭借作用于后轮的驱动机构骑行的自行车。有带或不带平衡轮的各种轮径、各种款式。儿童自行车不能用于公路骑行。


    1、儿童自行车欧盟CE认证标准

    Cycles - Safety requirements for bicycles for young children 自行车.幼儿自行车的安全要求


    2、儿童自行车欧盟CE认证指令

    GPSD 一般儿童自行车安全指令General Product Safety Directive 2001/95/EC


    3、EN ISO 8098:2014CE标准适用儿童自行车范围

    This International Standard specifies safety and performance requirements and test methods for the design, assembly and testing of fully assembled bicycles and sub-assemblies for young children. It also provides guidelines for instructions on the use and care of the bicycles. This International Standard is applicable to bicycles with a maximum saddle height of more than 435 mm and less than 635 mm, propelled by a transmitted drive to the rear wheel. It is not applicable to special bicycles intended for performing stunts (e.g., BMX bicycles). 本国际标准规定了儿童用全组装自行车和分总成的设计、组装和测试的安全和性能要求以及测试方法。它还为自行车的使用和保养提供指导。本国际标准适用于最大鞍座高度大于435 mm且小于635 mm的自行车,由传输驱动力驱动至后轮。它不适用于用于表演特技的特殊自行车(例如BMX自行车)。


    4、儿童自行车欧盟CE认证测试项目

    英文

    中文

    Definition of brake tests

    制动试验的定义

    Definition of strength tests

    强度试验的定义

    Numbers and condition of specimens for the strength tests

    强度试验用试样的数量和条件

    Tolerances

    公差

    Fatigue test

    疲劳试验

    Plastic material test ambient temperature

    塑料材料试验环境温度

    Impact test

    冲击试验

    Toxicity

    毒性

    Sharp edges

    锋利的边缘

    Security of screws

    螺钉的安全性

    Minimum failure torque

    最小失效扭矩

    Quick-release devices

    快速释放装置

    Foot location devices

    脚定位装置

    Crack detection methods

    裂纹检测方法

    Folding bicycle mechanism

    折叠自行车机构

    Protrusions

    突出物

    Braking-systems

    制动系统

    Attachment of brake assembly and cable requirements

    制动器总成附件和电缆要求


    5、儿童自行车欧盟CE认证流程

    1 提交CE认证申请表

    2 准备测试样品和英文技术资料(说明书,CE标签,材质报告,部件清单,DOC等)

    3 样品进行欧标测试

    4 技术资料审核与整改(郜盟国际专业指导工厂准备)

    5 测试通过后NB机构审核报告与技术资料

    6 审核通过后,工厂获得CE证书

    7 儿童自行车加贴CE标识,顺利进入欧盟市场流通


    郜盟国际的服务

    致力于中国制造全球化服务!

    专业提供欧盟CE认证,美国FCC认证, 俄罗斯EAC认证, 沙特SASO认证, 英国UKCA认证, 尼日利亚SONCAP认证等国际检测认证技术服务!


     
    上一篇:手持式链锯防护服CE认证- EN ISO 11393-2:2019详解-PPE
    下一篇:混凝土铺路板CE认证- EN 1339:2003 详解-CPR